 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MPSW05/D One Watt Amplifier Transistors NPN Silicon COLLECTOR 3 2 BASE 1 EMITTER MPSW05 MPSW06* *Motorola Preferred Device MAXIMUM RATINGS Rating Collector - Emitter Voltage Collector - Base Voltage Emitter - Base Voltage Collector Current -- Continuous Total Device Dissipation @ TA = 25C Derate above 25C Total Device Dissipation @ TC = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO IC PD PD TJ, Tstg MPSW05 60 60 4.0 500 1.0 8.0 2.5 20 - 55 to +150 MPSW06 80 80 Unit Vdc Vdc Vdc mAdc Watt mW/C Watts mW/C C 1 2 3 CASE 29-05, STYLE 1 TO-92 (TO-226AE) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case Symbol RqJA RqJC Max 125 50 Unit C/W C/W ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector - Emitter Breakdown Voltage(1) (IC = 1.0 mAdc, IB = 0) Emitter - Base Breakdown Voltage (IE = 100 mAdc, IC = 0) Collector Cutoff Current (VCE = 40 Vdc, IB = 0) (VCE = 60 Vdc, IB = 0) Collector Cutoff Current (VCB = 40 Vdc, IE = 0) (VCB = 60 Vdc, IE = 0) Emitter Cutoff Current (VEB = 3.0 Vdc, IC = 0) 1. Pulse Test: Pulse Width MPSW05 MPSW06 ICBO MPSW05 MPSW06 IEBO -- -- -- 0.1 0.1 0.1 Adc V(BR)CEO MPSW05 MPSW06 V(BR)EBO ICES -- -- 0.5 0.5 Adc 60 80 4.0 -- -- -- Vdc Adc Vdc v 300 ms, Duty Cycle v 2.0%. Preferred devices are Motorola recommended choices for future use and best overall value. Motorola Small-Signal Transistors, FETs and Diodes Device Data (c) Motorola, Inc. 1996 1 MPSW05 MPSW06 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued) Characteristic Symbol Min Max Unit ON CHARACTERISTICS(1) DC Current Gain (IC = 50 mAdc, VCE = 1.0 Vdc) (IC = 250 mAdc, VCE = 1.0 Vdc) Collector - Emitter Saturation Voltage (IC = 250 mAdc, IB = 10 mAdc) Base-Emitter Saturation Voltage (IC = 250 mAdc, VCE = 5.0 Vdc) hFE 80 60 VCE(sat) VBE(sat) -- -- -- -- 0.4 1.2 Vdc Vdc -- SMALL- SIGNAL CHARACTERISTICS Current - Gain -- Bandwidth Product (IC = 200 mAdc, VCE = 5.0 Vdc, f = 20 MHz) Output Capacitance (VCB = 10 V, f = 1.0 MHz) 1. Pulse Test: Pulse Width fT Cobo 50 -- -- 12 MHz pF v 300 ms, Duty Cycle v 2.0%. 400 TJ = 125C hFE , DC CURRENT GAIN 200 25C -55C 100 80 60 40 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 200 300 500 VCE = 1.0 V Figure 1. DC Current Gain VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 1.0 TJ = 25C 0.8 IC = 10 mA 50 mA 100 mA 250 mA 500 mA V, VOLTAGE (VOLTS) 1.0 TJ = 25C 0.8 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 1.0 V 0.6 0.4 0.4 0.2 0.2 VCE(sat) @ IC/IB = 10 0 0.05 0.1 0.2 0.5 2.0 5.0 1.0 IB, BASE CURRENT (mA) 10 20 50 0 0.5 1.0 2.0 5.0 10 50 100 20 IC, COLLECTOR CURRENT (mA) 200 500 Figure 2. Collector Saturation Region Figure 3. "On" Voltages 2 Motorola Small-Signal Transistors, FETs and Diodes Device Data MPSW05 MPSW06 VB, TEMPERATURE COEFFICIENT (mV/C) -0.8 -1.2 C, CAPACITANCE (pF) 80 60 40 Cibo TJ = 25C -1.6 VB for VBE 20 -2.0 -2.4 10 8.0 6.0 Cobo 0.2 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) 50 100 -2.8 0.5 1.0 2.0 5.0 20 50 10 100 IC, COLLECTOR CURRENT (mA) 200 500 4.0 0.1 Figure 4. Base-Emitter Temperature Coefficient f T, CURRENT-GAIN -- BANDWIDTH PRODUCT (MHz) Figure 5. Capacitance 300 IC, COLLECTOR CURRENT (mA) 200 VCE = 2.0 V TJ = 25C DUTY CYCLE 10% 2k 1k 500 200 100 50 20 30 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 200 10 1.0 TA = 25C TC = 25C 1.0 s 1.0 ms 100 s 100 70 50 dc dc CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT MPSW05 MPSW06 2.0 5.0 10 20 60 80 100 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 6. Current-Gain -- Bandwidth Product Figure 7. Active Region -- Safe Operating Area Motorola Small-Signal Transistors, FETs and Diodes Device Data 3 MPSW05 MPSW06 PACKAGE DIMENSIONS A R P F L B SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.135 --- 0.135 --- MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.56 0.41 0.48 1.15 1.39 2.42 2.66 0.46 0.61 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 3.43 --- 3.43 --- K DIM A B C D F G H J K L N P R V XX G H V 123 D J SECTION X-X NC N CASE 029-05 (TO-226AE) ISSUE AD STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 4 Motorola Small-Signal Transistors, FETs and Diodes Device Data *MPSW05/D* MPSW05/D |
Price & Availability of MPSW05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |